Infrared vs traditional home sauna: equipment, installation and upkeep
A traditional sauna heats the air, usually with an electric or wood-fired stove and stones, and that hot air warms you. An infrared cabin uses heated panels, rods or lamps that warm you mainly by radiant heat. ICNIRP gives typical cabin air of around 40°C for infrared, against 85 to 90°C for traditional saunas.
How each one heats
A traditional sauna warms the room. A stove heats stones and air, and water thrown on the stones adds humidity. The heat reaches you mostly through the hot air around you.
An infrared cabin, often sold as an "infrared sauna", warms you more directly. Emitters in the walls or behind the benches give off infrared radiation, so the air in the cabin stays much cooler than in a traditional sauna. The International Commission on Non-Ionizing Radiation Protection (ICNIRP) describes both kinds and gives the typical air temperatures in the table below. Source: ICNIRP, Infrared warming cabins
Side by side
| Traditional sauna | Infrared cabin | |
|---|---|---|
| How it heats | Hot air from a stove and stones | Radiant heat from panels, rods or lamps |
| Typical cabin air | About 85 to 90°C (ICNIRP) | About 40°C (ICNIRP) |
| Water on stones | Yes, adds humidity | No stones to pour water on |
| Heat source | Electric heater or wood-fired stove | Electric only |
| Typical form at home | Barrel or cabin sauna, often in the garden | Prefabricated cabin, often indoors |
Source for both temperature rows: ICNIRP. Actual settings vary by model, so check the manual for the unit you are offered.
The three kinds of infrared emitter
ICNIRP describes three types of infrared cabin. Ask the supplier which one you are being offered, because they behave differently:
- Large wall panels that run at a low surface temperature, about 50 to 70°C, giving even, gentle heat.
- Ceramic or metal rods with surface temperatures of about 300 to 400°C and metal reflectors, which heat users from the front and back less evenly.
- Filtered filament lamps, which emit shorter-wavelength infrared and a small amount of visible light.
Equipment and the safety standard to ask about
Electric sauna heaters and infrared cabins have their own international safety standard: IEC 60335-2-53, "Particular requirements for sauna heating appliances and infrared cabins". It covers electric sauna heaters, infrared emitting units, prefabricated saunas and prefabricated infrared cabins. A new fifth edition was published on 15 October 2026. Ask the supplier which standard the exact model has been tested to, and get it in writing. Source: IEC webstore, IEC 60335-2-53:2026
A wood-fired traditional sauna is not an electrical appliance, so that standard does not cover the stove. For wood-fired stoves, follow the maker's instructions on the flue and on distances from fences, sheds and trees. See our space, drainage and electrics checklist.
Installation in an Irish home
Power. An electric sauna heater or infrared cabin needs a suitable supply. Ask the supplier exactly what the model needs, then have a Registered Electrical Contractor check your board and fit it, and ask for a completion certificate. Source: Safe Electric
Indoors or in the garden. Infrared cabins are often placed indoors, while barrel and cabin saunas usually go in the garden. A garden sauna is a garden building, so check the planning rules first: read do you need planning permission for a garden sauna? and use our council question pack. Background: Citizens Information, planning permission.
Space and access. Measure the delivery route before you order, including gates, corners and stairs. See will it fit through the gate? and delivery and set-up.
Upkeep: what to ask for in writing
- Traditional: stones, heater elements, timber care and, for wood-fired units, flue cleaning. Ask what the maker says and how often.
- Infrared: emitter replacement, controls and timber care. Ask which parts are covered by the warranty and who services them in Ireland.
- Both: running cost. Use our running costs formula with the heater's rated power from the spec sheet. We do not quote prices.
Take the questions to ask a supplier list with you.
Health questions
We do not cover health effects. If you have a medical condition, speak to your GP before using any sauna. See our safety basics.
Questions
What is the difference between an infrared sauna and a traditional sauna?
A traditional sauna heats the air with a stove and stones. An infrared cabin warms you mainly by radiant heat from panels, rods or lamps, so the air stays cooler.
How hot is an infrared sauna compared with a traditional one?
ICNIRP gives typical cabin air of around 40°C for infrared cabins and 85 to 90°C for traditional saunas. Settings vary by model.
Can an infrared cabin be wood-fired?
No. Infrared cabins are electric. Traditional saunas can be electric or wood-fired. Electric units should be fitted by a Registered Electrical Contractor.
Which safety standard covers sauna heaters and infrared cabins?
IEC 60335-2-53, whose fifth edition was published on 15 October 2026. Ask your supplier which standard the model has been tested to.
Sources and review
- ICNIRP, Infrared warming cabins: https://www.icnirp.org/en/applications/infrared-warming-cabins/infrared-warming-cabins.html
- IEC 60335-2-53:2026: https://webstore.iec.ch/en/publication/106068
- Safe Electric: https://www.safeelectric.ie/
- Citizens Information, planning permission: https://www.citizensinformation.ie/en/housing/planning-permission/planning-permission/
- Keyword Planner volumes: /workspace/own-sites-seo/keywords-2026-10-25.csv (25 Oct 2026 pull)